...
1) Go to My Maps and click on the Stock Tune
2) Click Edit in the top right
3) Click on Request Tune
4) Choose protuningfreaks in the dropdown of tuners and fill out the details about the OTS map you're requesting and send it over to us and we'll turn it around.
NOTE: For now use the website not the mobile app for requesting OTS maps. Mobile apps will have this supported soon.
Any DYNO numbers?
S55 (M3 / M4):
Stage 1 93 octane: http://f80.bimmerpost.com/forums/sho...showthread.php?t=1297004
Stage 1 93 octane, comparison with JB4 on pump gas: httppump gas: http://f80.bimmerpost.com/forums/showthread.php?t=1328339
Stage 2 93 octane: http://f80.bimmerpost.com/forums/sho...showthread.php?t=1320220
Stage Stage 2 93 on car octane with OEM downpipes, just dropin filters and exhaust, comparison with JB4 on pump gas map 2 : http://f80.bimmerpost.com/forums/showpost.php?p=21434205&postcount=477
Stage 2 93 octane + Meth http://f80.bimmerpost.com/forums/showthread.php?t=1435169
N55 EWG (235i / 335i / 435i / M2 / X4 M40i / X5 35i / 640/535):
M2 (N55 EWG) FBO + Pure Stage 2 on pump 93 octane: http://f87.bimmerpost.com/forums/showthread.php?t=1344711
M2 (N55 EWG) FBO, Stock Turbo on pump 91 octane: http://f87.bimmerpost.com/forums/showthread.php?t=1437086
M235i, Stock turbo, pump gas, stock intercooler, just downpipe+intake: http://f30.bimmerpost.com/forums/showthread.php?t=1331464
335i Stock turbo + meth (world record N55): http://f30.bimmerpost.com/forums/showthread.php?t=1336322
335i FBO+Meth on stock turbo: http://f30.bimmerpost.com/forums/showthread.php?p=21017588
X4 M40i Stock Turbo 93 octane http://x3.xbimmers.com/forums/showthread.php?t=1425842
PWG 535 FBO+Pure Stage 2: http://f30.bimmerpost.com/forums/sho...php?p=21017588
S63TU (M5 / M6 / X5M / X6M):
Stage 2 on 93 octane + downpipes: http://f10.m5post.com/forums/showthread.php?t=1337143
Can I run E85 or meth and do you have OTS maps for these?
Yes, they're currently in beta and we'd love to have you on board with us going through testing.
Do you offer backend flashes to run with a JB4?
Yes. In fact our OTS Stage 1 and Stage 2 maps are great backend flashes as they raise load and torque targets far higher than stock allowing the DME and TCU to run as close to actual values as possible.
How do I datalog?
Using the bootmod3 mobile app and agent running in the car while connected to the bootmod3 servers (cloud).
Can I use my JB4 mobile app with your flash and log with JB Mobile?
Yes, absolutely.
Do I need to always have a laptop with me in the car to run the agent? Do I need the device always plugged in?
No. Agent that runs on a laptop or hardware device is only required to be used if using the bootmod3 app features. Otherwise, no need for anything to be plugged into the OBDII port.
What's the difference between bootmod3 and JB4?
bootmod3 reprograms the vehicle's factory engine control unit (DME) and in some cases other modules such as the transmission control unit (EGS/TCU). JB4 is a piggyback device that works in tandem with the DME to offer some of the features that may not be currently available with the factory DME (e.g. meth or secondary port fuel injection).
Can I tune my own car with bootmod3?
Yes! You can go into the Stock Tune and do 'Save As' another map so your stock tune stays in tact and you can start tuning it yourself or with your preferred tuner/shop.
...