...
Alternatively, if using the hardware OBD Agent device it comes preconfigured and you simply power it up from a USB connection in your vehicle and connect it to the OBD port with the ENET cable. It will attempt to auto-connect to a WIFI network called bootmod3, password bootmod3, and then connect with the bootmod3 servers. You can start a WIFI hotspot on your phone for the device to use as its Wifi connection, or, you can change the default WIFI settings by following these instructions.
Next, while the car is connected, you need to activate your license on the web. Here’s the link to the bm3 website:
http://www.bootmod3.net
NOTE: Each VIN being registered needs its own bootmod3 account signup on the web or app.
Click on the Add Device button on the Devices screen and enter the info as instructed via email (VIN, activation key and select the activation.bm3 file from your laptop).
Once activated you will see your VIN in the devices screen and a label on it indicating “OBD CONNECTED” and activation is complete.
To add your OTS map (attached to this email) you go into the My Maps screen and click on the “Add” button to add the map. Select the OTS map file from your machine and upload it.
At this point your account is activated and you have two maps under My Maps to switch between and the ACTIVE indicator shows you what your current map is. To load the OTS map we provided over email you can click/tap on it from the list in My Maps and hit the FLASH button (first button on the map description screen).
...