...
- Start the WiFi hotspot on your phone
- Connect OBD ENET cable between the car's OBD port and the device ethernet port
- Power the device using a USB connection
- Check to see your phone's hotspot gets connection from your device and that OBD CONNECTED message shows in the Devices screen in your app
- Once OBD CONNECTED shows go to the Dashboard screen and double-click on the top corner blue button any gauge to start the LOG
- If making datalogs for tuning adjustments you can start a log in 3rd gear at around 2500rpm and take it through the rev range and higher gears to collect as much data as possible
- Double-Click on the same button any gauge to end the datalog
- A full list of datalogs can be found under the Datalogs screen
- To send to your tuner click on the button on the right for each log entry and click "Share Link". This copies the link to the log and you can go into an email or SMS or bootmod3 customer support ticket and simply Paste the link to the log to send it over for discussion with your tuner.
...