You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 6
Next »
You've purchased a bootmod3 license and are looking to activate it and use the bootmod3 features. Here are the steps that outline how to accomplish that.
1) Place an order on www.protuningfreaks.com for your BM3 license. You'll receive an activation email with your VIN number and your software activation key.
2) Ensure you have the DME readout file from the dealer you worked with to unlock. This is the data that was on the DME at the time the unlock was done, usually stock data unless the car had a tune prior.
3a) Using Laptop - Connect your laptop or BM3 WIFI device to the OBD port using ENET cable. Install Java JDK version 8 (link here). Download the latest BM3 OBD Agent software for your laptop (link herej). NOTE: Java 9 is NOT supported and you MUST download the JDK, not the Java Runtime Environment.
4) Ignition On and see gas gauge show tank level (while engine is OFF) and go to the BM3 website:
Once activated you will see your VIN in the devices screen and a label on it indicating “OBD CONNECTED”. Activation is complete.