/
How to prepare your vehicle for Dyno Mode

How to prepare your vehicle for Dyno Mode

Owned by Dennis proTUNING Freaks
Last updated: Oct 07, 2018

Getting your vehicle ready for Dyno mode

Step-by-step guide

1. Close door
2. Ignition ON
3. Wait until all messages are gone
4. Hold left button on the dash for approx 15 seconds
5. Go to number 3 in the menu
6. Hold button until a new screen appears
7. Hold the traction button until DSC is OFF
8. Press the left button on speedo and speedo will go back to normal 
9. Start the car, set it setting to Sport Mode (do not use M1/2) buttons as it can remote traction and you will have to repeat.




Related content